Simply press down on the rim of the glass to trigger the high-pressure water jet, removing milk stains and coffee oils in seconds. Suitable for high-frequency items such as milk jugs, coffee cups, beer mugs, tumblers, and narrow-necked milk bottles, this fast glassware rinser can be installed on a bar or sink countertop.
Multi-angle ultra-fast cleaning: The nozzle features a radial nozzle and a pressure-bearing spring structure. Press and release to spray, creating a 360° water jet. At a water supply of 0.2–0.4 MPa, it can rinse common glassware in 2–5 seconds. The nozzle is tool-free for cleaning, and the nozzle is equipped with anti-clogging ribs to ensure consistent water flow even with frequent use.
Food-grade corrosion resistance: The Bar Top Glass Rinser's flow channel is made of SUS304, resistant to caffeic acid, milk stains, and detergents. Available black and silver finishes are scratch-resistant and fingerprint-resistant. All corners are rounded for a smooth, non-scratching feel. Quick-install: After snapping into place according to the corresponding opening dimensions, the panel naturally covers the cutout. A minimum of 14 cm of clearance is required at the bottom of the Bar Top Glass Rinser to complete the water inlet and outlet connections. Typical installation time for a single unit is 10–15 minutes, and an installation template is included with the product.
Smooth drainage and easy maintenance: The tray's internal diversion slope of approximately 2% and the large grille create a "quick in, quick out" water path, allowing for continuous flushing during peak hours without water accumulation. The grille and nozzle are completely removable, allowing daily cleaning with warm water and a neutral detergent, and weekly cleaning by soaking for descaling.
Customizable: Supports customizable laser/silk-screen logos, panel dimensions, nozzle quantity/hole placement, water inlet connectors, and surface finishes to match chain store standards.
In a coffee shop, between the espresso machine and Grinder, place the 600×240 mm long tray between the two machines. After draining milk, aim the Milk Jug mouth at the spray nozzle and press down for 2–5 seconds to remove stains. With your other hand, simultaneously wipe the steam wand and remove the cups. The large, non-slip support surface ensures a stable and consistent flow of cups during peak evening hours.
At the ice-cutting station in a milk tea shop, choose the 17.5×18.5 cm square Bar Top Glass Rinser to fit into a narrow workstation, allowing shakers and measuring cups to be rinsed as needed. The multi-angle water jets clean the threads and silicone ring, reducing manual scrubbing. The grille traps tea residue and fruit pulp to prevent drain blockage. Craft beer bar glass rinse station: Place the long, black, 33.8 x 19.0 cm Bar Top Glass Rinser next to the faucet in the short "rinse-serve" path to quickly rinse and pre-chill tulip and straight cups before serving. The 304 basin is resistant to wine stains and alkaline chemicals; simply remove the grille and rinse after closing the shop.
Hotel buffet breakfast island: A long, tray-shaped Bar Top Glass Rinser is built into the coffee/juice self-service station. The 45 mm flange prevents splashing and keeps the floor dry. Between shifts, simply remove and clean the nozzle and grille according to the daily/weekly cleaning checklist, ensuring repeatable hygiene standards.
Previous: Stainless Steel Glass Rinser
Next: Bar Cup Rinser